Electric Cold Pipe Cutting And Beveling Machine, Lightweight, 0.08 mm/r Feed
Cold Pipe Cutting And Beveling Machine Introduction
♦ The pipe cutting beveling machine is powerful and versatile, capable of cutting, beveling and flat flange processing.
♦ There is a wide range of choices for the wall thickness of the pipe. The main features are as follows: The light and simple design makes the cutting beveling machine an ideal tool for extremely small radial clearance. The design is simple, reducing the complexity of the parts by 40%, greatly improving the interchangeability of the parts.
♦ The fixing system can easily and automatically hold the tube. High-strength knife holder slides for long life and high precision.
♦ The fastening components are simple to request and can be adjusted with only one wrench. Electric and pneumatic drives are available.
Application:
■ Boiler plant
■ Nuclear power & thermal power
■ Pharmaceutical factory
■ Ship building and repaire
Features:
■ Split frame structure, can be quickly install
■ Cold Cutting and Beveling, no heat affected zones
■ Aeronautical aluminum material ensure portability
■ Low axial and radial clearance
■ Full closed bearing and driving gear system for operation safety
■ Machining OD of pipe from 2” up to 84”
Specification:
■ Drive Options: Pneumatic, Hydraulic, and Electric
■ Air requirements: 2-3m³/min
■ Hydraulic requirements: 65L/min,10MPa (15.8GPM,1500PSI)
■ Electric requirements: 220V/AC 50/60Hz
■ Feed mode: Star wheel, automatically
■ Feed rate: Fixed@0.08mm per circle
■ Used for pipe material: carbon steel, alloy steel, stainless steel, duples stainless steel, nickel alloy
Beveling type
Manufacture:
Working On Site:
Product Tags:
|
|
Electric Cold Cutting Pipe Cutting And Beveling Machine, Lightweight, 0.08 mm/r Feed Images
|
